about gallery exhibits links contact
   
Material Amt Comments
Z-Base Glaze Cone 6 (This is my Base Glaze) Oxidation
Good glaze to use with colorants. Very nice with 1% copper carb (light blue green) or 3% copper for dark forest green. Semi Matt finish with a silky feel. Best to spray glaze. This glaze works well with mason stains up to 10%. Glaze has a problem with iron. Will form a dark rust color at 2%. I use Laguna Borate instead of G. Borate and it works well. Very nice glaze with the addition of up to 10% rutile. (Try Titanium Diox. Up to 10%, good surface qualities)
Gerstley Borate 4
Whiting 17
Zinc Ox. 9
Nepheline Syenite 20
Potash Feldspar 30
Kaolin 14
Flint 7
     
Semi Gloss Ash Cone 6 Ox.  
Soda Feldspar 38 Nice glaze to use as a matt glaze. I use this
glaze as a spray coat to ZSM for glaze variation.
Use thin. Nice glaze with oxides for color.
I use Ash from Axner Supply in Florida.
For a more matt finish increase ball clay.
(this glaze can have a "dark" quality, try changing the ash)
Ash 40
Ball-OM 418
Talc
2
Dolomite 2
Bentonite 1%
     
Gold Black    Cone 6 OX  

Ball-OM4

3.9

Strange glaze! Turns gold where thick. Flat black with gold specks. Don't use with other glazes. Make small batches because glaze does not keep well. Worth the effort. (Nice flat Black - Take out the copper)

Red Art 47.8
Flint 3.9
Black Copper Ox. 4.9
Cobalt Ox. (Black) 3.9
Mag Dioxide 35.6
     
Base Clear  Cone 6  
Gerstley Borate 51 Very nice base glaze for use on porcelain. Clear shiny gloss glaze. (Try putting some Mason Stains in it - almost any stain. (Mason rating 1,3,6) at 2% to 10% would be nice)
Silica 31
Kaolin 16
Custer Spar 3
Bentonite 1
     
Always test glazes prior to use!
     

Glaze recipes courtesy of Jerrey Bennett

 
If you have questions about these glazes, Jerry Bennett can be contacted at jerry@jerrybennett.net

 

 

 
     

home | about | gallery | exhibits | links | contact
©Copyright 2006-2007 Vincent Renou. Rights protected | This is a Nonperishable website